| |
|
|
|
| |
| |
|
|
|
| |
MATERIALS
|
 |
|
| |
High Performance
Gasket Materials |
|
| |
|
| |
|
| |
|
| |
RN-8011 is a low density cellulose fiber material with high rubber filler content and a nitrile butadiene rubber binder. It provides excellent sealing of oil and water at low flange pressures, and is used primarily for engine and transmission pan gaskets, water pumps, and environmental seals. It is intended for applications with short duration maximum temperatures up to 180°C (350°F). RN-8011 has UL component recognition. |
| |
|
| |
|
| |
Property |
Specification |
Method |
| Density, g/cc(lb/cu.ft) |
0.61 (38) (min.) |
ASTM F 1315 |
| Compressibility, % (at 6.9MPa) |
35 - 60 |
ASTM F 36 |
| Recovery, % |
15 (min.) |
ASTM F 36 |
| Tensile Strength, AMD, MPa(psi) |
1.52 (220) (min.) |
ASTM F 152 |
| Fluid Resistance, IRM903 Oil |
|
ASTM F 146 |
| Change in Weight, % |
120 (max.) |
|
| Fluid Resistance, Fuel B |
|
ASTM F 146 |
| Change in Weight, % |
120 (max.) |
|
| Fluid Resistance, Distilled Water |
|
ASTM F 146 |
| Change in Weight, % |
45 (max.) |
|
| Binder Type |
Nitrile Butadiene |
|
|
|
|
| |
| Remarks and Related Documents |
Specification values determined by the test methods required for ASTM F-104, Type 3 materials. |
| |
| The information on this data sheet is based on laboratory test data we believe to be accurate, relevant and reliable. Please look upon these values as guides rather than absolutes. Since actual service conditions for a given application may vary substantially from standard laboratory conditions, specific recommendations or warranties relative to a specific end use cannot be made. The buyer is urged to conduct its own investigations and qualification tests to determine suitability for its intended application. Atlantic Gasket Corp. shall not be liable for any damages arising out of the use of any of its guide specifications.
|
 |
 |
|
|
