• Home
  • About
  • Glossary
  • Request a Quote or Sample
  • News & Events
  • Blog
  • Contact

Atlantic Gasket Corporation

  • ProductsCost-Effective Process
    • Gaskets
      • Custom Gaskets
      • Rubber Washers
      • Types of Gaskets
        • Rubber Gaskets
        • Silicone Gaskets
        • EPDM Gaskets
        • Foam & Sponge Gaskets
        • Molded Gaskets
        • Neoprene Gaskets
        • Viton Gaskets
        • High Temperature Gaskets
        • Nitrile Gaskets
        • Non-metallic Gaskets
        • Flange Gaskets
        • EMI / RFI
        • Thermoseal Materials
    • Cabinet Bumpers / Panel Spacers
      • Solid Urethane Bumpers
      • Urethane Foam Bumpers
      • Door Spacers
    • Stripping
      • Single-sided Foam Tape
      • Double-sided Foam Tape
    • MIL-T-6841 / AMS-T-6841 [Cork Rubber Tape]
    • 3M
      • Technical Data
        • Adhesion Basics/Surface Energy
        • Tape Selection Guide
        • Adhesive Forces
        • Adhesive Properties
        • Adhesive Construction
      • Adhesive Families/Spec Sheets
  • MaterialsInformation & Assistance
    • Solid Rubber
      • Neoprene Rubber
      • EPDM Rubber
      • Nitrile (Buna-N) Rubber
      • Silicone Rubber
      • Viton Rubber
      • Hypalon Rubber
      • Butyl Rubber
      • Electrically-Conductive Silicone & Fluorosilicone Rubber
    • Foam & Sponge
      • Sponge Materials
        • Closed Cell Neoprene
        • Closed Cell EPDM
        • Closed Cell Nitrile (Buna-N)
        • Closed Cell Silicone
        • Closed Cell ECH (Epichlorohydrin)
        • Closed Cell EVA (Ethylene Vinyl Acetate)
        • Closed Cell Neoprene / EPDM
        • Closed Cell Neoprene / EPDM / SBR
        • Closed Cell PVC / Nitrile
        • Closed Cell Neoprene / PVC / Nitrile
        • Natural Open Cell Sponge
      • Foam Materials
        • Crushed Cellular Foam
        • Cross-linked Polyethylene Foam
        • Open Cell Polyurethane Foam
        • Cellular Urethane Open Cell Foam
        • PVC Foam
    • Other Materials
      • Plastics
      • Vulcanized Fiber / Fishpaper
      • High Performance Gasket Materials
      • Plant Fibre
      • Felt
      • Composition Cork / Cork Rubber
      • Thermoseal Materials
  • CapabilitiesServing Most Industries
    • Gaskets
      • Custom Gaskets
      • Rubber Washers
      • Types of Gaskets
        • Rubber Gaskets
        • Silicone Gaskets
        • EPDM Gaskets
        • Foam & Sponge Gaskets
        • Molded Gaskets
        • Neoprene Gaskets
        • Viton Gaskets
        • High Temperature Gaskets
        • Nitrile Gaskets
        • Non-metallic Gaskets
        • Flange Gaskets
        • EMI / RFI
        • Thermoseal Materials
    • Die Cutting
      • Die Cutting Methods
      • Plastic Die Cutting
    • Slitting
    • Laminating
    • Water Jet Cutting
      • What is Waterjet Cutting?
      • Why Waterjet Cutting Works
      • Tool-less Gaskets with Waterjet Cutting
      • Quick Turnaround Gaskets with Hydrocutting
      • Custom Rapid Prototypes with Waterjet Cutting
      • Low Quantity, Small Run Gaskets with Waterjet Cutting
      • The Answer is Waterjet Cutting by Atlantic Gasket
    • Molded Rubber Parts
      • Rubber Molding
      • Custom Rubber Molded Parts
  • Technical DataTools & Information
    • Pressure Sensitive Adhesive Chart
    • Material Spec Sheets
    • Elastomer Data Tool
    • ASTM-D-1056 Information
    • Adhesive Spec Sheets
    • MIL-G-83528 Information
  • 3MProducts
    • Technical Data
    • Adhesive Families/Spec Sheets

3M 420 Acrylic Adhesive Family

The 420 Acrylic Adhesive family from 3M provides a short-term heat resistance up to 300° and an overall temperature range of -60° to 300° except for a few different products. The 420 Acrylic Adhesive family also provides a high tack bond to surfaces.

The 420 Acrylic Adhesive family can be provided in rolls up to 48” or 54” wide depending on the product and slit down to widths of your specific needs like the 3M 400 Acrylic Adhesive and 430 Acrylic Adhesive families. It can also be laminated to our materials and then die cut, kiss cut, and water jet cut into parts or strips of your necessity. These products include closed cell sponge, open cell sponge, mechanical rubber (such as neoprene, EPDM, Nitrile/Buna-N), corks, cork rubbers, and many plastic materials.

The 420 Acrylic Adhesive family can be found in the following products from 3M:

3M ADHESIVE TRANSFER TAPES

3M F9752PC (2 Mil Acrylic Adhesive) The 420 Acrylic F9752PC is a 2 mil acrylic adhesive that provides great tack and can be applied to low temperatures down to the freezing point at 32°. 3M F9752PC comes in rolls up to 54” wide.
3M F9755PC (5 Mil Acrylic Adhesive) The 420 Acrylic F9755PC is a 5 mil acrylic adhesive is the thicker variety of 3M F9752PC for surfaces with texture. 3M F9755PC comes in rolls up to 54” wide.

3M DOUBLE COATED TAPES

3M 94210 (3.9 Mil Acrylic Adhesive) The 420 Acrylic 94210 is a 3.9 mil acrylic adhesive that has good resistance to shock and provides high tack. 3M 94210 comes in rolls up to 54” wide.
3M 94215 (5.9 Mil Acrylic Adhesive) The 420 Acrylic 94215 is a 5.9 mil acrylic adhesive that is the thicker variety of 3M 94210. 3M 94215 comes in rolls up to 54” wide.
3M 94220 (7.9 Mil Acrylic Adhesive) The 420 Acrylic 94220 is a 7.9 mil acrylic adhesive that is the thicker variety of 3M 94215. 3M 94220 comes in rolls up to 54” wide.

3M REMOVABLE/REPOSITIONABLE TAPES

3M 9425 (5.5 Mil Acrylic Adhesive) The 420 Acrylic 9425 is a 5.5 mil acrylic adhesive that is a medium to high tack for parts that require repositioning. 3M 9425 comes in rolls up to 48” wide and has an overall temperature range of -20° to 125°.
3M 9425HT (5 Mil Acrylic Adhesive) The 420 Acrylic 9425HT is a 5 mil acrylic adhesive that is a medium to high tack for parts that require permanent placement on one substrate and repositioning on the other surface. 3M 9425HT comes in rolls up to 48” wide and has an overall temperature range of -20° to 250°.

3M TAPES FOR ELECTRONIC SOLUTIONS

3M 9795 (5.6 Mil Acrylic Adhesive) The 420 Acrylic 9795 is a 5.6 mil acrylic adhesive that is the double coated variety of 3M F9755PC and specializes in the attachment of graphics and lamination of foam. 3M 9795 comes in rolls up to 54” wide and has an overall temperature range of -40° to 300°.
3M 9795B (5.6 Mil Acrylic Adhesive) The 420 Acrylic 9795B is a 5.6 mil acrylic adhesive that has a thin, black polyester film that provides improvements in laminating, handling, and die-cutting. 3M 9795B comes in rolls up to 54” wide and has an overall temperature range of -40° to 300°.

  • 3M 420
    • 3M Adhesive Transfer Tapes
    • 3M Double Coated Tapes
    • 3M Removable/Repositionable Tapes
    • 3M Tapes for Electronic Solutions

Atlantic Gasket Corporation

 

Copyright Atlantic Gasket Corporation 2016 . All rights reserved.
Website Design by DDA

 Waterjet Cutting 

Do you need custom prototypes to prove your theory? Do you require low quantites? What is waterjet cutting? What are the advantages to waterjet cutting? Do you want to eliminate tooling?

Click here to find out more about waterjet cutting.

 Contact Us 

ATLANTIC GASKET CORPORATION
3908 Frankford Avenue
Philadelphia, PA 19124
Click here to see our location on Google Maps.

Phone: 800-229-8881 or 215-533-6400
Fax: 215-533-4130

Email: sales@atlanticgasket.com