3M Electrically Conductive Family

The Electrically Conductive family from 3M provides a resistance to corrosion while displaying a good tack at the initial adhesion and a temperature range of 20° to 160°. The 3M Electrically Conductive adhesive has exceptional conductivity with its low electrical resistance and built-in conductive fibers that give the tape stability.

The Electrically Conductive family can be provided in rolls up to 14” and 24” wide and slit down to widths of your specific needs like the Thermally Conductive and Silicone Adhesive families. It can also be laminated to our materials and then die cut, kiss cut, and water jet cut into parts or strips of your necessity. These products include closed cell sponge, open cell sponge, mechanical rubber (such as neoprene, EPDM, Nitrile/Buna-N), corks, cork rubbers, and many plastic materials.

The Electrically Conductive family can be found in the following products from 3M:

3M TAPES FOR ELECTRONIC SOLUTIONS

3M 9703 (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9703 is a 2.0 mil electrically conductive adhesive that is the low outgassing variety of 3M 9705 with interconnects which are only conductive in the z-axis. 3M 9703 comes in rolls up to 24” wide.
3M 9705 (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9703 is a 2.0 mil electrically conductive adhesive that has interconnects which are only conductive in the z-axis. 3M 9705 comes in rolls up to 24” wide.
3M 9706 (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9706 is a 2.0 mil electrically conductive adhesive that the stronger adhesion variety of 3M 9705 with interconnects which are only conductive in the z-axis. 3M 9706 comes in rolls up to 24” wide.
3M 9709 (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9709 is a 2.0 mil electrically conductive adhesive that has strong EMI shielding and is conductive in the XYZ-axis. 3M 9709 comes in rolls up to 14” wide.
3M 9709S (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9709S is a 2.0 mil electrically conductive adhesive that has strong EMI shielding and is conductive in the XYZ-axis. It works well as grounding for plated and stainless steel surfaces. 3M 9709S comes in rolls up to 14” wide.
3M 9709SL (2.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9709SL is a 2.0 mil electrically conductive adhesive that is the same as 3M 9709S except with a low release premium liner. 3M 9709SL comes in rolls up to 14” wide.
3M 9712 (5.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9712 is a 5.0 mil electrically conductive adhesive that has strong EMI shielding and is conductive in the XYZ-axis. 3M 9712 comes in rolls up to 24” wide with a carbon scrim.
3M 9713 (3.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9713 is a 3.0 mil electrically conductive adhesive that has strong EMI shielding and is conductive in the XYZ-axis. 3M 9713 comes in rolls up to 24” wide with a ni-carbon scrim.
3M 9719 (4.0 Mil Electrically Conductive Adhesive)	The Electrically Conductive 9719 is a 4.0 mil electrically conductive adhesive that has strong EMI shielding and is conductive in the XYZ-axis. 3M 9719 comes in rolls up to 14” wide with a ni-carbon scrim.