Thermoseal C-4408 is a high performance compressed fiber gasket material with a low carbon steel woven mesh insert. C-4408 is manufactured using synthetic fibers with a Nitrile binder system and is an excellent gasket material for high stress and high temperature applications sealing fluids at temperatures up to 750°F (399°C) and for sealing gases and steam at temperatures up 450°F (232°C). This material performs well as a gasket and seal in applications that vary in both pressure and temperature.
Thermoseal C-4408 is available in sheets 60" x 60" square in the following thicknesses: 1/32", 3/64", 1/16", 3/32" and 1/8". If requested, Atlantic Gasket will gladly die-cut or waterjet cut parts to your exact dimensions and can ship finished parts the same day if needed.
Meets ASTM F104 F712112B3E11M6
|Physical Properties||Test Method||Typical Valve|
|Creep Relaxation (.031")||ASTM F38B||20%|
|Recovery (min.)||ASTM F36J||50%|
(After Immersion in Fuel B for 5 hrs. at 73 F (C))
|ASTM F 146||10 (max.)|
|Thickness Increase ASTM F146
After immersion in:
|ASTM Oil 1 5h/300°F (149°C)
ASTM Oil IRM903, 5h/300°F (149°C)
ASTM Fuel A 5h/73°F (23°C)
ASTM Fuel B 5h/73°F (23°C)
|Dielectric Strength||ASTM D149-95a||N/A|
|Density||ASTM F1315||119 pcf (1.9 g/cc)|
|Leachable Chloride Content||FSA Method (Typical)||N/A|
This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.
Click here to download a specification PDF document.