Description: Style AG70FDA is a 70 durometer FDA grade silicone gasketing material, which is designed for use in gasketing applications where food may be present. 70 durometer FDA grade silicone is manufactured with FDA approved ingredients listed in CFR 117.2600, an FDA regulation which involves rubber articles intended for repeated use in contact with food. Style AG70FDA has a service temperature of -80°F to +450°F, with the ability to withstand +500°F on an intermittent basis. 70 durometer FDA grade silicone is a non-toxic and chemically inert silicone material, which is low volatile, peroxide free, and does not discolor over time. The material takes a low compression set and offers excellent UV and ozone resistance. AG70FDA 70 durometer FDA grade silicone is manufactured to meet 3-A Sanitary Standard 18-03 Class IV.
Atlantic Gasket’s FDA grade silicone gasketing material is available in a wide range of durometers, ranging from as soft as 30 Durometer (AG30FDA) to as hard as 70 Durometer (AG70FDA) with standard durometers in between. Style AG70FDA is produced white in color. 70 durometer FDA grade silicone can be slit to width in rolls ranging from as narrow as 1/4" wide, up to 36" in width. Atlantic Gasket can manufacture 70 durometer FDA grade silicone without adhesive or choose an adhesive from our standard acrylic adhesive or our high-temperature acrylic adhesive. AG70FDA is available in standard and custom thicknesses. Send in a drawing, and let Atlantic Gasket die-cut or waterjet cut 70 durometer FDA grade silicone to meet your exact requirements.
21 CFR 177.2600
3-A SANITARY STANDARD 18-03 CLASS IV
|Physical Property||Test Method||Unit of Measure||Typical Properties|
|DUROMETER||ASTM D 2240||SHORE A||70|
|TENSILE STRENGTH||ASTM D 412||psi||650|
|SPECIFIC GRAVITY||ASTM D 297||G/CC||1.50|
|TEAR||ASTM D 624||ppi
|ELONGATION||ASTM D 412||%||275|
|HIGH INTERMITTENT TEMPERATURE||N/A||°F
This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.
Click here to download a specification Word document.