Silicone Gaskets

Rubber gasket manufacturer, Atlantic Gasket Corporation, offers a broad range of silicone grades to produce custom rubber silicone die cut and waterjet cut gaskets that meet exact customer specifications. At Atlantic Gasket, all silicone grades are available as thin as .008" thick to 1" thick and are offered in continuous rolls or cut to meet your precise requirements. All silicone grades come in a measure of hardness (durometer) as soft as 25 durometer, and as hard as 80 durometer. Standard colors include orange/red, black, gray, and white; special colors are available upon request.

Features of Atlantic Gasket's Custom Rubber Silicone Gaskets:
  • UV/Ozone Resistant
  • Extreme High and Low Temperature Resistance
  • Low Compression Set
  • Fungus Resistant

Atlantic Gasket's Available Silicone Grades

Commercial Grade (CG) Silicone

Commercial Grade (CG) silicone is designed for applications where physical properties are not critical, but extreme temperature resistance is needed. Click on the following links to view a specification sheet:

Specification Grade (GP) Silicone

Specification Grade (GP) silicone is designed for applications where higher physical properties and lower compression sets are required. This material meets ZZ-R-765 Class 2A. Click on the following links to view a specification sheet:

Fiberglass Reinforced Silicone

Fiberglass Reinforced silicone is designed for applications requiring a resilient, non-porous material that performs to the highest level in operating temperatures between -100 to 500°F. Click on the following link to view a specification sheet:

Medium Strength (MS) Silicone

Medium Strength (MS) silicone is designed for gasketing applications where high physical properties such as tensile strength and tear resistance are required. Click on the following links to view a specification sheet:

High Strength (HS) Silicone

High Strength (HS) silicone is designed for applications where exceptionally high strength physical properties and good tear resistance are critical. This material meets the requirements of ZZ-R-765 Class 3B. Click on the following links to view a specification sheet:

Fluorosilicone (FS) Silicone

Fluorosilicone (FS) silicone is designed for applications involving extreme conditions where temperature, fuel/solvent, and ozone resistance are necessary. This material meets MIL-R-25988 Type 2, Class 1. Click on the following links to view a specification sheet:

Electrically Conductive Silicone

Electrically Conductive (EC) silicone is designed to act as a low amperage conductor and to provide protection against electrostatic discharge. Click on the following link to view a specification sheet:

Medical Grade (MED) Silicone

Medical Grade (MED) silicone is tested to meet USP Class 6 standards, which make it suitable for a variety of medical applications. Click on the following links to view a specification sheet:

FDA Grade (FDA)

FDA Grade (FDA) is a low volatile, peroxide free, and avoids discoloration over time making it ideal in applications where food is present. This material is manufactured with all FDA approved ingredients per CFR.117.2600. Click on the following links to view a specification sheet:

Translucent Grade Silicone

Translucent Grade silicone is similar to FDA grade silicone in that it is low volatile, peroxide free, and avoids discoloration over time. It is also manufactured using all FDA approved ingredients per CFR.117.2600. Click on the following link to view a specification sheet:

Low Temperature Grade (LT) Silicone

Low Temperature Grade (LT) silicone is designed for gasketing applications that will be exposed to temperatures as low as -103˚F. This material meets ZZ-R-765 Class 1A. Click on the following link to view a specification sheet:

Extreme Low Temperature Grade (ELT) Silicone

Extreme Low Temperature Grade (ELT) silicone is designed for gasketing applications that will be exposed to temperatures as low as -130˚F. This material is non-toxic, chemically inert and meets ZZ-R-765 Class 3A. Click on the following link to view a specification sheet:

High Temperature Grade (HT) Silicone

High Temperature Grade (HT) silicone is designed for gasketing applications requiring extreme high temperature resistance over an extended period of time. This material has a service temperature range of -80˚F to +600˚F and is formulated with FDA approved ingredients. Click on the following link to view a specification sheet:

Reversion Resistant Grade (RR) Silicone

Reversion Resistant Grade (RR) silicone is an excellent gasketing material for applications where it will be exposed to high temperatures over an extended period of time. Click on the following link to view a specification sheet:

We also offer Vacuum Blankets (VB-S) for the "Woodworking Industry" as well as Vacuum Blankets (VB-HS) for the "Aerospace Industry".

In addition to the above silicone rubber materials, we can supply many types of cellular silicone ranging from closed cell sponge and foam to open cell foam in continuous rolls 36" wide or we would be glad to die-cut or waterjet cut parts to meet your precise requirements. The following are our most popular styles of closed cell Silicone sponge and open cell Silicone foam:

Closed Cell Silicone Sponge

Closed cell Silicone sponge is an excellent gasket material for applications that require a soft compressible material that can be used in extreme temperatures from -103° F to + 450° F. This material is both UV and Ozone resistant and meets ASTM D1056, MIL-R-6130 and MIL-STD 670. Please click on the following links for the specification sheet for our soft, medium, firm and extra firm density Silicone closed cell sponge:

Low Compression Set Closed Cell Silicone Sponge

Low compression set closed cell Silicone sponge is supplied in a medium density (33 PCF) and is designed for applications where the need for a low compression set gasket material is critical. This material has excellent tensile strength and elongation and has a service temperature of -103° F to + 450° F. Click on the following link to view a specification sheet:

Flame Retardant Closed Cell Silicone Sponge

Flame Retardant closed cell Silicone sponge is available in a medium density and is specially formulated to meet the requirements of MIL-R-6130 Type 2, Grade A, Condition Medium. It is also capable of meeting UL 94 HB and DMS 1980 specifications. Please click on the following link to open the specification sheet for our Flame Retardant closed cell Silicone sponge:

Fiberglass Reinforced Closed Cell Silicone Sponge

Fiberglass Reinforced closed cell Silicone sponge is supplied in a medium density. The Fiberglass reinforcement is the reason for the excellent tensile strength and dimensional stability of this material and allows for tighter tolerances on die-cut and waterjet cut parts. Please click on the following link to open the specification sheet for our Fiberglass Reinforced closed cell Silicone sponge:

Fiberglass Reinforced Flame Retardant Closed Cell Silicone Sponge

Fiberglass Reinforced Flame Retardant closed cell Silicone sponge is an excellent gasket material that is UV and Ozone resistant. This material has a service temperature range of -103° F to + 450° F and the fiberglass reinforcement provides dimensional stability to the Silicone sponge, which allows for tighter tolerances on die-cut and waterjet cut parts. Please click on the following link to open the specification sheet for our Fiberglass Reinforced closed cell Silicone sponge:

Closed Cell Silicone Foam

Closed cell Silicone Foam is a lightweight Silicone foam with excellent resistance to UV and Ozone. This material is an exceptional gasket material and can be used to seal electronics and lighting enclosures and is often used to reduce shock and isolate vibration. The operating temperature of this material is -67° F to + 392° F and it is a UL94 V-0 and UL94 HF-1 listed material. Please click on the following link to open the specification sheets for our medium, firm and extra-firm density closed cell Silicone foam.

Open Cell Silicone Foam

Open cell Silicone foam is designed as a gasket material for applications that require a lightweight and easy to compress material. This material is UV and ozone resistant and takes a low compression set. It is listed under UL94 V-0 and UL94 HF-1 and meets the requirements of FDA regulation CFR 117.2600. Please click on the following links to open the specification sheet for our soft and soft/medium density open cell Silicone foam:

By investing in state-of-the-art die cutting and waterjet cutting equipment, Atlantic Gasket is able to produce custom silicone rubber gaskets and die-cut parts as small as 1/16" diameter up to 36" diameter and any size or shape in between. If required, silicone rubber gaskets can be custom manufactured at Atlantic Gasket with an acrylic or high temperature silicone adhesive backing. In addition, the silicone rubber gaskets we produce for customers can be supplied to meet military specifications including ZZ-R-765, MIL-R-25988, AMS3195, AMS3325, AMS3326, AMS3327, AMS3320, and AMS3315.