• Home
  • About
  • Glossary
  • Request a Quote or Sample
  • News & Events
  • Blog
  • Contact

Atlantic Gasket Corporation

  • ProductsCost-Effective Process
    • Gaskets
      • Custom Gaskets
      • Rubber Washers
      • Types of Gaskets
        • Rubber Gaskets
        • Silicone Gaskets
        • EPDM Gaskets
        • Foam & Sponge Gaskets
        • Molded Gaskets
        • Neoprene Gaskets
        • Viton Gaskets
        • High Temperature Gaskets
        • Nitrile Gaskets
        • Non-metallic Gaskets
        • Flange Gaskets
        • EMI / RFI
        • Thermoseal Materials
    • Cabinet Bumpers / Panel Spacers
      • Solid Urethane Bumpers
      • Urethane Foam Bumpers
      • Door Spacers
    • Stripping
      • Single-sided Foam Tape
      • Double-sided Foam Tape
    • MIL-T-6841 / AMS-T-6841 [Cork Rubber Tape]
    • 3M
      • Technical Data
        • Adhesion Basics/Surface Energy
        • Tape Selection Guide
        • Adhesive Forces
        • Adhesive Properties
        • Adhesive Construction
      • Adhesive Families/Spec Sheets
  • MaterialsInformation & Assistance
    • Solid Rubber
      • Neoprene Rubber
      • EPDM Rubber
      • Nitrile (Buna-N) Rubber
      • Silicone Rubber
      • Viton Rubber
      • Hypalon Rubber
      • Butyl Rubber
      • Electrically-Conductive Silicone & Fluorosilicone Rubber
    • Foam & Sponge
      • Sponge Materials
        • Closed Cell Neoprene
        • Closed Cell EPDM
        • Closed Cell Nitrile (Buna-N)
        • Closed Cell Silicone
        • Closed Cell ECH (Epichlorohydrin)
        • Closed Cell EVA (Ethylene Vinyl Acetate)
        • Closed Cell Neoprene / EPDM
        • Closed Cell Neoprene / EPDM / SBR
        • Closed Cell PVC / Nitrile
        • Closed Cell Neoprene / PVC / Nitrile
        • Natural Open Cell Sponge
      • Foam Materials
        • Crushed Cellular Foam
        • Cross-linked Polyethylene Foam
        • Open Cell Polyurethane Foam
        • Cellular Urethane Open Cell Foam
        • PVC Foam
    • Other Materials
      • Plastics
      • Vulcanized Fiber / Fishpaper
      • High Performance Gasket Materials
      • Plant Fibre
      • Felt
      • Composition Cork / Cork Rubber
      • Thermoseal Materials
  • CapabilitiesServing Most Industries
    • Gaskets
      • Custom Gaskets
      • Rubber Washers
      • Types of Gaskets
        • Rubber Gaskets
        • Silicone Gaskets
        • EPDM Gaskets
        • Foam & Sponge Gaskets
        • Molded Gaskets
        • Neoprene Gaskets
        • Viton Gaskets
        • High Temperature Gaskets
        • Nitrile Gaskets
        • Non-metallic Gaskets
        • Flange Gaskets
        • EMI / RFI
        • Thermoseal Materials
    • Die Cutting
      • Die Cutting Methods
      • Plastic Die Cutting
    • Slitting
    • Laminating
    • Water Jet Cutting
      • What is Waterjet Cutting?
      • Why Waterjet Cutting Works
      • Tool-less Gaskets with Waterjet Cutting
      • Quick Turnaround Gaskets with Hydrocutting
      • Custom Rapid Prototypes with Waterjet Cutting
      • Low Quantity, Small Run Gaskets with Waterjet Cutting
      • The Answer is Waterjet Cutting by Atlantic Gasket
    • Molded Rubber Parts
      • Rubber Molding
      • Custom Rubber Molded Parts
  • Technical DataTools & Information
    • Pressure Sensitive Adhesive Chart
    • Material Spec Sheets
    • Elastomer Data Tool
    • ASTM-D-1056 Information
    • RMA Tolerances for Die Cut & Molded Parts
    • Adhesive Spec Sheets
    • MIL-G-83528 Information
  • 3MProducts
    • Technical Data
    • Adhesive Families/Spec Sheets

AG-613-65-032-Composite-NG-1 Nickel Coated Graphite Silicone

Style AG-613-032-Composite-NG-1 is an electrically-conductive shielding gasket material that is a 65 durometer (Shore A) nickel graphite-filled silicone elastomer which protects electronic equipment and produces shielding against radio frequency interference (RFI) and electromagnetic interference (EMI). AG-613-032-Composite-NG-1 nickel graphite-filled silicone is reinforced with a conductive inner layer of fabric for additional support and strength while helping the product provide a volume resistivity of 0.007 ohm/cm.

AG-613-032-Composite-NG-1 is similar to our other conductive fabric-reinforced nickel graphite-filled silicone, AG613-65-020-Composite-NG-1. This reinforced, conductive silicone can be converted into die-cut and water jet cut parts or provided in continuous rolls. The rolls of AG-613-032-Composite-NG-1 are provided in a dark gray color.

Data Usual Values
Shore A (63 +/-5) 65
Tensile psi (Report) 950 psi
Elongation (Report) 20%
Tear “B” ppi (35 Min) 165
Specific Gravity (Report) 1.93
Compression Set % 70 Hours 100°C (Report) 25%
Volume Resistivity ohm/cm (Report) .007 ohm/cm
Thickness (0.032" +/-0.003) 0.032"
Color Dark Gray
Thermal Stability Range -67°F to 392°F (-55°C to 200°C)

The chart below compares the electrically-conductive fabric-reinforced nickel graphite-filled silicone to other filler materials that act as electromagnetic interference (EMI)/radio frequency interference (RFI) shielding. We offer the silver coated glass filler in silicone which has a wide temperature range and acts as an environmental sealant. When compared to other fillers such as silver coated aluminum, silver coated copper, and silver coated glass, nickel coated graphite has a conductivity that is comparable to its silver counterparts.

Filler Conductivity Typical Volume
Resistivity (V.R.)
Cost
Silver Extremely Conductive .0009 ohms/cm Most Expensive
Silver Coated Aluminum Super Conductive .003 ohms/cm More Expensive
Silver Coated Copper Super Conductive .001 ohms/cm Expensive
Silver Coated Glass Very Conductive .006 ohms/cm Less Expensive
*Nickel Coated Graphite Conductive .01 ohms/cm Least Expensive*


This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.

PDF Click here to download a specification Word document.

  • Materials
    • Solid Rubber
      • Neoprene Rubber
      • EPDM Rubber
      • Nitrile (Buna-N) Rubber
      • Silicone Rubber
      • Viton® Rubber
      • Hypalon Rubber
      • Butyl Rubber
      • Electrically-Conductive Silicone & Fluorosilicone Rubber
    • Foam & Sponge
    • Other Materials

Atlantic Gasket Corporation

 

Copyright Atlantic Gasket Corporation 2016 . All rights reserved.
Website Design by DDA

 Waterjet Cutting 

Do you need custom prototypes to prove your theory? Do you require low quantites? What is waterjet cutting? What are the advantages to waterjet cutting? Do you want to eliminate tooling?

Click here to find out more about waterjet cutting.

 Contact Us 

ATLANTIC GASKET CORPORATION
3908 Frankford Avenue
Philadelphia, PA 19124
Click here to see our location on Google Maps.

Phone: 800-229-8881 or 215-533-6400
Fax: 215-533-4130

Email: sales@atlanticgasket.com

Viton® Rubber Gaskets

Gasket manufacturer, Atlantic Gasket Corporation, offers Viton® rubber gaskets, rubber sheets, and other parts and sealing components. Viton® rubber gasket material is available in a variety of styles: Commercial Grade Viton® rubber, Viton® A rubber, Viton® B rubber, Viton® F rubber, Viton® Extreme rubber, and Viton® Base Resistance rubber. Viton® washers can be made with thicknesses ranging from .016" to .250" and hardness ratings between 55 durometer to 90 durometer. The attractive properties of Viton® rubber can be summarized as follows: great resistance to aliphatic hydrocarbon fluids, gas impermeability, and excellent resistance against acids, oils, and heat. If you’re ready for outstanding performance from your rubber gaskets, turn to Atlantic Gasket Corporation.