Style AG-613F-60 is an electrically-conductive shielding gasket material that is a 60 durometer (Shore A) nickel-coated graphite-filled fluorosilicone elastomer which protects electronic equipment and produces shielding against radio frequency interference (RFI) and electromagnetic interference (EMI). AG-613F-60 nickel-coated graphite-filled fluorosilicone differs from its silicone counterparts because it specializes in protection from harsh environmental conditions with fuels and solvents. It has a volume resistivity of .05 ohm/cm with a shielding effectiveness of greater than 113 dB.
AG-613F-60 is similar to our other electrically-conductive nickel-coated graphite-filled elastomers such as AG-613F-50 (fluorosilicone) and AG-613F-80 (fluorosilicone) which also provide protection against solvents and fuels. This nickel-coated graphite-filled fluorosilicone can be converted into die-cut and water jet cut parts or provided as sheets or continuous rolls. AG-613F-60 comes in sheet sizes of 15” x 20”, 10” x 20”, 12” x 12”, and 10” x 10” while coming in rolls of up to 12” wide. The material can be provided in a dark gray color.
|Shore A (63 +/-5)||60|
|Tensile psi (Minimum 200)||225 psi|
|Elongation (Minimum 200)||400%|
|Tear “B” ppi (Minimum 35)||45|
|Specific Gravity (2.175 +/- .075)||2.20|
|Volume Resistivity ohm/cm (0.1 max)||.05 ohm/cm|
|Shielding Effectiveness 100MHz-10GHz (E-Field)||Greater than 113 dB|
|Thermal Stability Range||-67°F to 392°F (-55°C to 200°C)|
The chart below compares the electrically-conductive nickel-coated graphite-filled fluorosilicone to other filler materials that act as electromagnetic interference (EMI)/radio frequency interference (RFI) shielding. We offer the nickel-coated graphite-filled fluorosilicone which acts as a great sealant against environmental factors, especially the severe ones with fuels/solvents, and large temperatures ranges. When compared to other fillers such as silver-coated copper, silver-coated glass, and silver-coated aluminum, nickel-coated graphite has a conductivity that is comparable to its silver counterparts.
|Silver||Extremely Conductive||.0009 ohms/cm||Most Expensive|
|Silver Coated Aluminum||Super Conductive||.003 ohms/cm||More Expensive|
|Silver Coated Copper||Super Conductive||.001 ohms/cm||Expensive|
|Silver Coated Glass||Very Conductive||.006 ohms/cm||Less Expensive|
|*Nickel Coated Graphite||Conductive||.01 ohms/cm||Least Expensive*|
This information is furnished as a guide for selecting materials. Atlantic Gasket Corp. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining suitability of material for a particular application.
Click here to download a specification Word document.