AG213 is a 2 mil acrylic transfer adhesive supplied on an 80# Kraft liner.
This high tack tape laminates well to many foam, rubber, and plastic materials. AG213 is particularly good at bonding to closed cell sponge rubber and open cell urethane foam. The acrylic formulation provides good long term resiliency and better temperature resistance than rubber based adhesives.
|Release Liner Thickness||.0046" (80#)|
|Adhesion to Steel||74 oz/in width|
|(PSTC 101) Modified|
|Shelf Life||One year minimum when stored at 70°F and 50% relative humidity.|
|Bond Strength To:|
|Closed Cell Sponge Rubber||Good|
|Open Cell Sponge Rubber||Fair/Good|
|Open Cell Urethane Foam||Good|
|Low Surface Energy Material||Fair/Good|
Modification PSTC 101:
30 minute dwell
2.5 mil non-coated densified Kraft paper for a support backing.
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.