AG216 is a 5 mil unsupported acrylic adhesive supplied on an 80# Kraft liner. This adhesive has a high initial tack and adheres well to many rubber, plastic and foam substrates.
The 5 mil mass of adhesive is very useful for conforming to irregular surfaces (such as textured plastics), materials that have aggressive plasticizers (e.g. PVC foam), or when a high bond strength is required. AG216 bonds well to closed cell sponge rubber, open cell urethane foam and polar materials. It also bonds effectively with low surface energy materials and open cell sponge rubber.
|Release Liner Thickness||.0046" (80#)|
|Adhesion to Steel||100 oz/in width|
|(PSTC 101) Modified|
|Shelf Life||One year minimum when stored at 70°F and 50% relative humidity.|
|Bond Strength To:|
|Closed Cell Sponge Rubber||Good|
|Open Cell Sponge Rubber||Fair/Good|
|Open Cell Urethane Foam||Good|
|Low Surface Energy Material||Fair/Good|
Modification PSTC 101:
30 minute dwell
2.5 mil non-coated densified Kraft paper for a support backing.
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.