AG2318 is a half mil polyester film coated on two sides with a high tack permanent pressure sensitive rubber based adhesive protected by an 80# densified kraft release liner.
Application:
This product is designed for a wide range of applications where high tack and good bond strength to a wide range of materials is required. It has good adhesion to open cell urethane foam, closed cell sponge rubber, polyethylene foam, felt, cork, and many other materials. AG2318 bonds well to low surface energy materials. This product also meets the requirements of FDA 21 CFR 175.105 for indirect food contact applications.
Typical test data: | ||||
---|---|---|---|---|
Thickness | PSTC-133 ASTM D3652 | Exposed side: Carrier: Liner side: |
1.6 mils 0.5 mils 1.4 mils |
|
Liner | 80# Kraft | |||
Peel Adhesion | PSTC-101 ASTM D3330 | Exposed side: Liner side: |
95 oz. 115 oz. |
|
Probe tack | ASTM D2979 | Exposed side: Liner side: |
1450 grams 1875 grams |
|
Shear | ||||
Exposed side | PSTC 107 / ASTM D3654 | >10,000 minutes (1" X 1" @ 500 & 1000 grams) | ||
Liner side | PSTC 107 / ASTM D3654 | >10,000 minutes (1" X 1" @ 500 & 1000 grams) | ||
Elevated Temperature Test | ||||
Exposed side | ASTM D4498 MODIFIED | 180° F | ||
Liner side | ASTM D4498 MODIFIED | 180° F |
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.