AG315 is a double coated, high tack acrylic adhesive on both sides of a 4 mil thick tissue tape. The tissue carrier provides dimensional stability without the stiffness of a polyester film. This tape laminates well to many foam, rubber, and plastic materials. AG315 balances high peel, good initial tack and shear strength. The acrylic formulation provides good long term resiliency and better temperature resistance than rubber based adhesives.
AG315 is a good choice for applications that require a firm, weather resistant bond such as gasketing in the automotive, transportation, HVAC, or electronics industry. It works well for kiss-cutting parts on rolls or clean thru cut parts.
|Exposed Side Adhesive Thickness||.0015"|
|Liner Side Adhesive Thickness||.00125"|
|Liner Thickness||.0046" (80#)|
|Adhesion to Steel||Liner Side 80oz/in width|
|(PSTC 101) Modified||Exposed Side 80oz/in width|
|Shelf Life||One year minimum when stored at 70°F and 50% relative humidity.|
|Closed Cell Sponge Rubber||Good|
|Open Cell Sponge Rubber||Good|
|Open Cell Urethane Foam||Good|
|Low Surface Energy Material||Fair/Good|
Modification PSTC 101:
30 minute dwell
2.5 mil non-coated densified Kraft paper for a support backing.
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.