AG316 is a double coated, high tack acrylic adhesive on both sides of a 3 mil thick nonwoven tape. The nonwoven carrier provides dimensional stability and allows it to conform to irregular surfaces, such as textured plastics. This tape laminates well to many foam, rubber, and plastic materials. AG316 balances high peel, good initial tack and shear strength. The acrylic formulation provides good long term resiliency and better temperature resistance than rubber based adhesives.
AG316 is a good choice for applications that require a firm, weather resistant bond such as gasketing in the automotive, transportation, HVAC, or electronics industry. It works well for kiss-cutting parts on rolls or clean thru cut parts.
|Exposed Side Adhesive Thickness||.0020"|
|Liner Side Adhesive Thickness||.0020"|
|Liner Thickness||.0046" (80#)|
|Adhesion to Steel||Liner Side 90oz/in width|
|(PSTC 101) Modified||Exposed Side 90oz/in width|
|Shelf Life||One year minimum when stored at 70°F and 50% relative humidity.|
|Closed Cell Sponge Rubber||Good|
|Open Cell Sponge Rubber||Good|
|Open Cell Urethane Foam||Good|
|Low Surface Energy Material||Fair/Good|
Modification PSTC 101:
30 minute dwell
2.5 mil non-coated densified Kraft paper for a support backing.
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.