Product: Style AG318 Double Coated Non Woven Tape
AG318 is a high tack acrylic adhesive coated on both sides of a conformal non-woven tape. It bonds well to many foam, rubber and plastic substrates. AG318 balances high peel, good initial tack and shear strength. The acrylic formulation provides good long term resiliency and better temperature resistance than rubber based adhesives.
AG318 is a good choice when a firm bond to open or closed cell sponge rubbers, open cell urethane foam, or polar materials is required. The non-woven material provides stability but also can conform to uneven substrates, such as textured plastics.
| Specifications | |
|---|---|
| Color | Transparent |
| Exposed Side Adhesive Thickness | .0015" |
| Liner Side Adhesive Thickness | .00125" |
| Liner Thickness | .0046" (80#) |
| Carrier Thickness | .003" |
| Adhesion to Steel | Liner Side 70oz/in width |
| (PSTC 101) Modified | Exposed Side 70oz/in width |
| Low Temperature | -34°F |
| High Temperature | +250°F |
| Shelf Life | One year minimum when stored at 70°F and 50% relative humidity. |
| Bond To: | |
|---|---|
| Closed Cell Sponge Rubber | Good |
| Open Cell Sponge Rubber | Good |
| Open Cell Urethane Foam | Good |
| Polar Material | Good |
| Low Surface Energy Material | Fair/Good |
Modification PSTC 101:
30 minute dwell
2.5 mil non-coated densified Kraft paper for a support backing.
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.