Product: Style AG9422 Acrylic Based Double Coated Polyester
AG9422 is a half mil polyester film coated on two sides with a high tack acrylic adhesive protected by an 80# densified kraft release liner.
Application:
This product is designed for a wide range of applications where high tack and good bond strength to a wide range of materials is required. The acrylic formulation has better temperature resistance than rubber adhesives and better longevity. AG9422 has good adhesion to cellular urethane foam, closed cell sponge rubber, polyethylene foam, cork, and many other materials.
| Typical test data: | ||||
|---|---|---|---|---|
| Thickness | PSTC-133 | Exposed side: Carrier: Liner side: |
1.8 mils 0.5 mils 1.8 mils |
|
| Liner | 80# Kraft | |||
| Peel Adhesion | PSTC-101 ASTM D3330 STD-10 |
Stainless Steel Exposed side: Stainless Steel Liner side: |
70 oz. 74 oz. |
|
| Loop tack | PSTC-16, STD-7 2 mil PET 20" min |
Stainless Steel Exposed side: Stainless Steel Liner side: |
54 oz. 62 oz. |
|
| Shear | ||||
| Exposed side | PSTC 107 / ASTM D3654, STD-9 | >10,000 minutes | ||
| Liner side | PSTC 107 / ASTM D3654, STD-9 | >10,000 minutes | ||
| Temperatures | ||||
| Maximum Continuous | +225° F | |||
| Maximum Intermittent | +275° F | |||
| Minimum Application | +50° F | |||
This information is for reference only. Atlantic Gasket shall not be held responsible for its content or use. It is the customer’s responsibility to obtain and test samples to determine the suitability of a material for a specific application.
Click here to download a specification Word document.